BC100 - Columns and Feed-In Devices

Selecting the RIGHT bag closing equipment to fit you needs is fast, easy and accurate.

Using the chart below, here’s how to do it:

1. Pick the closure you want to make; either plain or tape-bound.

2. Determine whether you need a standard or automatic sewing head.

3. Select the type of bag material.

4. Choose the column.

5. Add a feed-in-device, if necessary.

Example:

Let’s say you want to make plain closures on either paper or synthetic fibers using a standard head.  You would use Style BC111-P01-1.  Following the chart to the right from BC111-P01-1, you see the US400 column as your selection and that a feed-in-device is not necessary.  But let’s say you want to increase production with the same plain sewn closure.  The Style BC111-P11-1 will do the same job at a significantly increased speed using the GB29905G feed-in-device with a US400 column. 

The results:  Efficient automation with reduced labor costs!

GB29905G