|
SunStar's
SPS/E-1507 series
is the combination of SunStar's cutting-edge
technologies, It leads the automated sewing system
with step-ahead volutionary features.
|
|
|
 |
With the maximum speed of 2700smp, it has an outstanding productivity.
The use ofthe motor direct drive brings about the pleasant working environment and reduces theworker's fatigue.
|
|
|
|
|
|
|
The installation of Fortuna IV 550W guarantees high needle penetration,
so that themachine has sufficient power to handle heavy materials sewing.
|
|
|
|
|
|
|
SunStar’s Direct Drive AC Servo Motor directly sends power to the upper shaft.
This optimal design minimizes energy loss.Compared with existing AC Servo motors, it consumes much less energy.
|
|
|
|
|
|
 |
|
|
Equipped with 550W AC ServoMotor, the sewing machine canpowerfully handle heavy materials. |
|
|
Compared with competitors, more stable motor capabilityis offered
(patent filing under way) Based on 3-D CAD &CAE interpretation,
it produces less noises and lowvibration.
The sewing machine can make accurate stop,and its prompt and smooth responsiveness leads toproductivity enhancement. |
|
|
|
|
|
 |
|
|
Users can easily adjust the height of Feeding Plate inline with various sewing conditions from the OP Box. |
|
|
|
|
|
 |
|
|
With full cross control, the X-Y feed can be adjusted atthe unit of 0.05mm.
This enables precise and delicatesewing, and its benefit is clearly manifested in thesewing of difficult slant lines and curves. |
|
|
|
|
|
 |
|
|
The clamp which does not have any clearance andmotion can support the sewing materials in a stablemanner and helps produce good-quality sewing outcome. |
|
|
|
|
|
 |
|
|
According to the thickness of sewing materials, the presser foot height can be adjusted, and high-quality sewing isguaranteed for sewing materials whose thickness is different. |
|
|
|
|
|
 |
|
|
Various functions can be used by pressing icons,and the setting can be done with one-touchoperation. As such, even the first-time users caneasily operate the machine. |
|
|
Up to 999 patterns can be registered in the memory.There are two function keys, which can combine upto 30 registered patterns. This function enables fastoperation. |
|
|
The CF card enables a large number of patterns to bestored. |
|
|
|
|
|
 |
|
|
By lightening the control box, the working space under the table has been expanded. |
|
|
|
|
|
 |
|
|
As a seamless rack type, fewer breakdowns occur, and maintenance becames eaiser. |
|
|
|
|
|
 |
|
|
The power on/off LED enables fast checking of the causes of troubles and A/S sevices. |
|
|
|
|
|
 |
|
|
Input Sewing Pattern Design Using of PDA/PC |
|
|
It is Convenient for Creating Pattern Design Using of PDA or PC |
|
|
|
|
|
|
|
|
| Model |
 |
SPS/E-1507HS-□□ |
|
SPS/E-1507GS-□□ |
|
| Application |
|
Heavy Materials |
|
General Materials |
|
| Sewing Area(X,Y) |
|
150 x 7 |
|
| Sewing Speed |
|
Max.2,700 spm (Stitch Length 3mm and less) |
|
| Stitch Length |
|
0.05 ~ 12.7 mm |
|
| Needle |
|
DP x 17 # 18 |
|
DP x 5 # 14 |
|
| Hook |
|
Large Shuttle Hook |
|
| Height of feeding plate |
|
Max.25 mm (Pneumatic specifications : Max.30 mm ) |
|
| Height of presser foot |
|
Max.20 mm |
|
| Presser foot stroke |
|
4 mm ( 0 ~ 7 mm ) |
|
Variable lover
position of the
intermediate presser |
|
Standard 0~3.5mm (Max. 0~7.0mm) |
|
| Trimming Device |
|
Provided |
|
| Wiper |
|
Provided (Automatic Wiper) |
|
| Emergency Switch |
|
Provided |
|
| Memory Device |
|
CF Card 3.5" (Option : 305" Floppy Disk) |
|
| No. of Patterns |
|
Max. 2,100 Patterns |
|
| No. of Stitches |
|
Max. 360,000 Stitch |
|
| Enlarging/Reducing |
|
1 ~ 400% ( 0.1% STEP ) |
|
| Main Motor |
|
Fortuna IV 550W Direct Drive AC Servo Motor |
|
| Feeding System |
|
Feeding by Servo Step Motor |
|
| Power |
|
Free volt (110V~220V) |
|
| Pneumatic |
|
0.49 Mpa(5Kgf/㎠) |
|
|
|
