 User-friendly design
Cylinder bed with shorter circumference
Thread tension control structure
Attaching fortuna Servo motor III/IV
|
|
|
 |
|
 |
An edge of a Material is trimmed by left mess while sewing a machine. So, one process, workers have to cut an edge after sewing, doesn't need anymore. |
|
|
|
|
|
 |
|
|
Cloth chips trimmed by left mess are sucked away using air. So, the work environment is much improved. |
|
|
|
|
|
 
 |
|
|
Designed for easy use and simplified external appearance. |
|
|
|
|
|
 |
|
|
It is possible to have a variety of tasks by decreasing the circumference of the cylinder bed (270mm). |
|
|
|
|
|
 |
|
|
It is possible to get high quality stitch width that thread tension is independentely controlled. |
|
|
|
|
|
|
The timing between needle and rotary hook, and the shape of thread take-up were optimized. And the upper thread-passing route is improved to provide more stable thread tension. |
|
|
|
|
|
 |
|
|
The direct connection of the presser foot knee-lifting device to the machine facilitates simplicity at the same time guarantees light and soft operations. |
|
|
|
|
|
 |
|
|
The embedded PCB to the machine pulley instead of a complicated synchronizer promises accurate signal sensing with the servomotor as well as simplifies the external appearance of the machine. |
|
|
|
|
|
 |
|
|
Small motor that is possible to move and install easily, as your wish. Small motor can be installed easily to the sewing machine. Using timming belt, not V-belt and it gives to worker a stable work condition by controlling Fortuna Ⅳ Controller.
 |
|
|
|
|
|
 |
|
|
On the casion of high speed sewing work, viscosity of oil can be lowered. For keeping the viscosity, it is installed to lower-pivot that oil cooling fan. It gives a preventing temperature rising, stable oil supply, and rising a product's durability. |
|
|
|
|
|
 |
|
|
It can be cut top cover thread stably caused by simple and believable structure. And it can be attached top cover thread trimmer easily after removing the wiper.
|
|
|
|
 |
|
|
|
|
| Stitch type |
 |
ISO 406, 407, 602, 605 |
|
| Application |
|
Acceptedly sewing |
|
| Sewing speed |
|
Maximum 6000 spm |
|
| Stitch width |
|
1.4 ~ 3.6 mm |
|
| Needle used |
|
UY 128GAS #65 ~ #90 |
|
| Needle distance |
|
| 2 Needle |
|
3.2, 4.0, 4.8, 5.6, 6.4mm |
|
| 3 Needle |
|
5.6, 6.4 mm |
|
|
| Needle plate stroke |
|
31 mm |
|
| Presser foot stroke |
|
Maximum 7 mm(Decoration thread maximum 5mm) |
|
| Cylinder bed circumference |
|
270mm |
|
| Differential rate |
|
| Maximum net differential rate |
|
1 : 2.9 |
|
| Maximum reverse differential rate |
|
1 : 0.3 |
|
|
| Lubrication |
|
Auto filling system |
|
|
|
|
|
|
|
