|
PLY-E7203 Automatic Pocket Welting Machine |
 |
 |
 |
|
Automatic Pocket Welting Machine
PLY-E7203 (Specifications with slanted pocket)
|
|
|
| * |
The operation status is shown with illustrations. The working state of stitching, center knife, corner knife and stacker, etc., is displayed for quick confirmation. |
| * |
Six types of sewing lengths can be saved. |
| * |
The corner knife and center knife can be individually adjusted at the start or end of stitching using the control box. |
| * |
Up to ten types can be set for cycle sewing. |
| * |
A fault diagnosis monitor is incorporated making it easy to see the faulty section, such as a top dead point fault or center knife rise fault. |
| * |
The stitching can be switched between parallel, slanted and trapezoid with a single touch. |
| * |
The time one needle is stopped can be adjusted between 1 and 9mm independently for the start of stitching side and end of stitching side. |
| * |
The height of the T-shape ruler can be adjusted with a single touch. (By mounting an option) |
| * |
The flap holder operates alternately. (The flap instructed side is first.) (By mounting an option) |
|
|
 |
| Stitch type |
Parallel |
installed |
| Slant |
installed |
| Trapezoid |
installed |
| Stitch length(mm) |
20 - 200
(Corner knife:30 - 200) |
| Setting of stitch length |
6 kinds (Available setting by each 1mm) |
| Flap sewing |
installed |
| Cycle sewing |
Stitch type : 5 kinds
Stitch length : 6 kinds
(Max:10 kinds) |
| Max. speed (rpm) |
Selecting 1600, 2000 and 2200
(800rpm when other needle stops.) |
| Sewing pitch (mm) |
Condense sewing: 1.0, 1.5, 2.0
Reverse stitch: 1.5, 2.0, 2.5, 3.0
Ordinary sewing: 1.5, 2.0, 2.5, 3.0 |
| Knife system |
Center knife: Upper knife system
Tab knife: Push up mechanism |
| Reverse stitch |
Select: condence / reverse stitch |
| Hook |
Horizontal rotating hook / Large |
| Needle |
DPx17#16(#14 - #18)
135x17#100(#90 - #110) |
| Needle gauge (mm) |
Standard |
9, 10, 12 |
| Special |
14, 16, 18, 20, 25.4, 31.8 |
| Center knife |
Upper knife system |
| Corner knife |
Ceramics : 1 pair |
| Stacker |
Standard |
YS-2 (Pick-up type) |
| Option |
YS-1 (Bar type) |
| Mass (kg) |
200 |
|
|
