Trouser Side Seamer Machine
|
- Pegasus EXT 3216 Sewing Head
- PLC Control Systém
- Graphical Touch-Screen Control Panel
- Efka Mini Stop DC Servo Motor
- Pneumatic Contour (Edge) Guiding Systém
- Automatic Sewing Start and End Photocell
- Air Nozzles on Table for Smooth Fabric Transport
- Manual Fullness Distribution by Differential Top and Bottom Feeding
- Special Sewing Equipment (with Foot Pedal) for Trouser Side Seams with Pockets
- Automatic Chain Cutting Waste Removal
|
 |
|
|
Main Features
|
- Pegasus EXT 3216 Sewing Head
- PLC Control Systém
- Graphical Touch-Screen
- Efka Mini Stop DC Servo Motor
- Pneumatic Contour (Edge) Guiding Systém
- Automatic Sewing Start and End Photocell
- Air Nozzles on Table for Smooth Fabric Transport
- Manual Fullness Distribution by Differential Top and Bottom Feeding
- Special Sewing Equipment (with foot pedal) for Trouser Side Seams with Pockets
- Automatic Chain Cutting Waste Removal
- Sewing Speed of 7,000 spm
- Seam With 10 mm Standard and 11, 12 Optionall
- Top Feed 0-6,0 mm
- Stitch Length 1-6 mm
- Differential Feed Ratio 0.5-6 mm
- Needle Systém B27 80-120 Nm
- 40 Programs
The sewing unit TS-1300 (short table) and TS-2300 (long table) were designed to sew trousers side seams and inseams on trousers, and lining seams on skirts. The machine provides an option of sewing 4 or 5-thread safety stitches, double chainstitch seam. The use of photocell for start and end of sewing increases the productivity. A constant fullness distribution is reached by the differential top and bottom feeding. It is much easier to sew trousers side seams with pockets thanks to our special kit supplied as standard with foot control. Taking advantage of the programmable PLC with the touch screen control, the operator can guide the hip curve at maximum sewing speed.
Performance TS-1300
- 650-700 trousers (4 seams) per 8 hour day
- 900 trousers (outside) per 8 hour day
- 1200 trousers (inseams) per 8 hour day
Performance TS-2300
- 650 trousers (4 seams) per 8 hour day
- 900 trousers (outside) per 8 hour day
- 1500 trousers (inseams) per 8 hour day
Sewing Procedure
- 1. the front and back trouser panels are aligned at each other
- 2. the mouse clamps the work piece so it stayes tightened
- 3. the hip pocket and other difficult section are sewn manually
- 4. the guide is activated and the machine is automatically switched to the automatic sewing
- 5. the overlock chain is trimmed and sucked automatically to the waste
- 6. the finished work piece is automatically stacked
|
|
